Almost 7 years after building Nixie clocks I gave them chases. These are 3D printed on my Anycubic Kossel Linear 3D printer. As there are 2 ckocks with different tubes (IN 14 and IN 16) I builded 2 chasis with different top side openings to fit both tube types.
From behind there are holes for power adapter and two setup buttons.
Chases are made of two parts. Upper is main part which encloses the clock completely. Bottom part is used to close the chase by means of 8 (or more) tiny screws.
Chases look nice even when clocks are not working.
If you want to build there chases all files needed (.stl and g-code files) can be found here.
From behind there are holes for power adapter and two setup buttons.
Chases are made of two parts. Upper is main part which encloses the clock completely. Bottom part is used to close the chase by means of 8 (or more) tiny screws.
Chases look nice even when clocks are not working.
If you want to build there chases all files needed (.stl and g-code files) can be found here.
Comments
Post a Comment